Dave "AirDave" Winfield is the owner of Outlawz Airbrush, located in Southern Ontario, Canada. Outlawz offers a wide variety of services including Airbrush Instruction for the beginner or hobbyist. A self taught airbrusher, Dave and his artwork have earned numerous awards over the years.
This is not a difficult project, but it does involve a number of different preparation, masking and application techniques. A little time and patience will yield a good result. This article covers the entire project from start to finish and is therefore quite extensive, using a larger series of images. My intention was to provide enough step-by-step details for a beginner airbrusher to follow. For all artwork, Red and Transparent Black Golden Acrylic Colours are used, except for the metallic "aluminum" base colour and Autoborne Opaque White.
P40 WarMouse
P40 WarMouse side P40 WarMouse rear
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
...and finally...once everything is properly dried (a heat gun or hair dryer will help cure everything) tack it down, remove any dust or dry overspray and coat with any good quality clearcoat. Reassemble your components and plug in your new P-4- WarMouse!